A&D Air tank Intelligent Energy-saving drainage

Air reservoir dedicated drainage design, overcome impurities, sludge blocking problem. Large-diameter passthrough drainage valve combined with innovative detection technologies, maintenance-free, without blocking, no waste compressed air problem.

 ◎ Not blocking
A&D Energy-saving drain products, the drain valve uses a 6mm large-diameter round hole ball valve type, and the inlet and outlet are designed with straight flow to completely remove impurities and sludge, and overcome the problem of drainage blockage in the air storage tank.

 

◎High Energy Saving

A&D Energy-saving drain products, unique detection technology design, simulate the operation method of artificial intelligence "Close when draining is complete", adjust with the amount of water, without causing loss of compressed air.


 

Most Practical

A&D Energy-saving drain products, the design concept breaks through the traditional detection method, using a little space at the bottom of the air storage tank as the volume of water accumulation, and can completely discharge the water and impurities each time the water is drained, which can meet the application requirements of various air compressor horsepower.

 

A comparison of characteristics of air storage tank drainers

Product Type

Intelligent Energy-saving Models

Dual Timer Models

No Air Exhaust Models

Valve Type

Ball Valve

Solenoid Valve

Solenoid Valve

Drainage Method

Drainage Period+ Water Amount Detection

Drainage Period+Drainage Time

Water Level Detection

Advantages

 

Low cost, readily recyclable

Low investment cost

Discharging condensed water in accordance with the amount of condensate

Discharging condensed water in accordance with the amount of condensate

No limitation on the height of installation position

No air loss

Impurities will also be discharged during drainage

 

 

Very little air loss

 

 

Can be used with a wide variety of air compressors

 

 

No limitation on the height of installation position

 

 

Shortcomings

 

Compressed air loss is large

The height of installation position is limited

 

Easy to block and lead to inability to drain smoothly

High investment and repair cost

 

 

Easy to block and lead to inability to drain smoothly

 

 

Usage limited by the volume of accumulated condensed water

The principle of A&D Air tank Energy-saving drainage

 
Step1_Wait condensate water produced
Step2_Drain cycle time arrives
Step3_Electric motor to open valve

 

 
Step4_Detection of condensed water
Step5_Detection of water reduction
Step6_Electric motor shut valve

 Product Specification Sheet

Product Model
AD-480A Ⅲ
AD-480B Ⅲ
Electric Used
1ψ110V/50~60Hz
1ψ220V/50~60Hz
Power consumption
10 W
Pressure Used
0.1~7 ㎏/㎝²G   MAX. 16 kg/cm2
Fluid Used
Compressed air condensate
Fluid Temperature
2~60 ℃
Drainage method
Water sensing or Time off
Drainage period
5 ~ 999 min
Drainage time
Outlet Detection or 1 ~ 999 sec
Dimensions
145 ㎜ × 75 ㎜ × 130 ㎜
Weight
1.6 ㎏